All the PDF files linked on this page are taken from Skutt.com or from training literature made available by Skutt Kilns. All files are PDF and require Adobe Acrobat reader.
Kilns
KilnMaster Manual For Kilns Manufactured After June 2013
This is the most up to date KilnMaster Operating Manual. If you have a kiln that was manufactured prior to 2013 you will want to scroll down and choose the manual for your kilns manufacturing date as the features may vary.
KilnMaster Manual For Kilns Manufactured Between March 2006 And June 2013
If your Kiln has a Green LED display and, under the Settings Menu you have “16-S” as a feature option, this is the correct manual for you.
KilnMaster Manual For Kilns Manufactured Between November 1999 And August 2006
If your controller display is Red, there is a “F/C” key in the top right hand corner and the word “Idle” flashes on the display when the kiln is not firing, this is the correct manual for your kiln. Kilns manufactured between 2004 and 2006 have a red display but instead of having the F/C button they have a Menu button with some new features. For these models you will also want to download the 2004 KM Manual Addendum at the bottom of this page.
KilnMaster Manual For Kilns Manufactured Prior To November 1999
If your kiln has a Red display and does not flash the word “Idle” when the kiln is not firing, this is the correct manual for you.Skutt Operating Instructions Manuals for Kiln Accessories
KM Manual Addendum For Kilns Manufactured Between 2004-2006
If your kiln has a Red Display and a Menu key in the top right hand corner of the display you will need to download this manual addendum to learn about some new features that were added to the controller.
KilnMaster Touchscreen Controller (KMT) Manual
This is the manual for the KMT Controller. It is designed to work in coordination with the standard KM manual.Skutt Operating Instructions Manuals for Wheels
KMLT Manual
This is the correct manual for the FireBox 8×6, FireBox 8×4, and the GlazeTech Kilns.
KilnSitter Kiln Owners Manual
This is the most current KilnSitter Owners Manual. If your kiln has a “KS” at the beginning of the model name, this is the correct manual for you. The model name can be found on the serial plate on the side of the control box. This manual is for Models KS1227-3, KS1027-3, KS1027, KS1018-3, KS1018, KS818, KS714, KS614 and KS609. If your kiln was manufactured after October 1st, 2018, you will also want to download the 2018 KilnSitter Addendum below which contains amended wiring diagrams.
KilnSitter Kiln Manual For Kilns Manufactured Between 1980 And June Of 1996
In 1980 Skutt began naming kilns by the number of bricks around and how deep it was expressed in inches (i.e. 1027). This is the correct manual for you if your model name incorporates this new style but does not include “KS” in the name. Also all models would begin their serial number with the letter “A”. This includes the following models: 1227, 1027, 1018, 818WR, 818, 818P, 818PWR, 714, and 614-3. The 609 had a separate manual.
KilnSitter Kiln Manual For Kilns Manufactured Prior To 1980
If your kiln has one of the following Model names, this is the correct manual to download: 2353, 235, 231, 231-18, 185-27, 185-27, 183-27, 185, 183, 181, 145.
Addendum For KilnSitter Kilns Manufactured After October 1st, 2018
This addendum contains slightly amended wiring diagrams that were necessitated by the introduction of a replacement 3-Heat Switch.
GlassMaster Kiln Manual For Kilns Manufactured After January 2006
If your GlassMaster controller display is illuminated with green LEDs (not red), this is the manual for your kiln.
GlassMaster Kiln Manual For Kilns Manufactured Prior To January, 2006
If your GlassMaster controller display is illuminated with red LEDs (not green), this is the correct manual to download.
GlassMaster Touchscreen Controller (GMT) Manual
This is the manual for the GMT Controller. It is designed to work in coordination with the standard GM manual.
GlassMaster LT Manual For Kilns Manufactured After October 2005
If your GlassMaster LT Controller has “Pro” mode this is the manual for your kiln. You can test this by holding the “Up” arrow key down for 4 seconds. It will beep when you first press it and then beep again if you have Pro Mode. If you have the older controller it will not beep again.
Manual For GlassMaster LT Manufactured Prior To October, 2005
This controller was originally only available on the HotStart kiln before it was changed to the HotStart Pro. This is the correct manual to download if your kiln does not have a Hotstart Pro sticker on the front of the control box.
FireBox 8 Manual
This manual is for the manually controlled FireBox 8 glass kiln.
COE 33 Scarab Kilns Manual
This is the manual for all Scarab Kilns
Kiln Accessories
KilnLink Manual
This manual will walk you through the installation and operation of KilnLink.
EnviroVent 2 Manual
This manual covers the installation and operation of the EnviroVent 2 Downdraft Vent. If your vent motor mounts underneath the kiln you have the original EnviroVent not the EnviroVent 2.
EnviroVent Manual
This is the manual for the original EnviroVent which has the vent motor mounted directly under the kiln.
EnviroLink Manual
This is the manual for the EnviroLink which is a device that allows you to control your EnviroVent or EnviroVent 2 through your kilns controller.
EnviroLink Manual For KMT/GMT Kilns
If you have a Touchscreen Controller, this is the manual you’ll need to install and program your EnviroLink to control the EnviroVent or EnviroVent 2 vent system.
Transformer Manual
This is the manual for the Transformer upgrade for PK Kilns. The system allows you to stack up to 3 kilns and have them run on a single controller so they stay in sync.
Wheels
Skutt Electric Potter’s Wheel Manual
This is the Pottery Wheel Manual for all Skutt Electric Wheels.
Skutt Kickwheel Manual
This is the manual for the Skutt Kickwheel.